And again, your manual will help you locate it.)

(Usually it is called “Port Forwarding”, “Virtual Servers”, “applications”. I. Go to the section on your router settings where you can forward ports. Check to see if your PS4 NAT Type has changed and if the network connection is smooth now. Ii. Enable DMZ and enter the IP address of your PS4 you’ve just written down into the DMZ setting. I. Find the DMZ setting on your router (you may need to check your router manual). You should think twice before going on to the steps below.

The devices in this zone have better communication with the networks outside, but they will be vulnerable to the attacks from the Internet. IMPORTANT: DMZ ( demilitarized zone) is a subnetwork that lies between the insecure Internet and your trusted home network. And some of your PS4 online functions may not be able to work. You can only connect to players of Open type. The chance of disconnection are the highest. Type 3 (Strict): This is the strictest type. Your PS4 connects to the Internet with a router. But you can still connect to most of the players out there. Compared with the Open type, you will have higher lag and slower connection. Type 2 (Moderate): Your PS4 connects to the Internet with a router. The downside is that your connection can be insecure. And you can connect to all NAT types of users. Your PS4 has the least chance of disconnection and high gaming latency.

Type 1 (Open): This is a totally open type. NAT is necessary because it can save a lot of addresses as the number of them is far less than enough. It is a method that “translates” the IP addresses of all your devices in your home into a public one (all done very fast in your router). NAT is short for Network Address Translation.

How to change nat type to open for bo2